2022 Land Pride FPS Series FPS48
- Year 2022
- Make Land Pride
- Model FPS Series
2022 Land Pride FPS Series FPS48
Land Pride's FPS48 Food Plot Seeder is a highly versatile full component package designed to open and break up soil surfaces by discing the soil for seedbed or planting preparation. It will then spread the seeds while simultaneously pressing the seeds into full soil contact with a trailing fluted roller/packer. It can also be used to spread fertilizer, lime, gypsum and other soil conditioning amendments at distances ranging from 4 ft. to 20 ft. The spin spreader can also be used in the off-season to spread sand or salt for winter icing or slick snow conditions.
Features may include:
ELECTRIC SPREADER- Electric spin spreader dispenses seed. Restrictor plate allows smaller seed to be run through the spreader at a lower volume per acre, while the deflector allows you to reduce seed dispersion width down to 48".
- Incorporates seed for seed-to-soil contact. Pivots for storage without taking spreader off unit.
- The Electric Spin Spreader dispenses seed. A restrictor plate allows smaller seed to be run through the spreader at a lower volume per acre, while the deflector allows you to reduce seed dispersion width down to 48".
- 16" Notched disc blades provide aggressive digging and cutting action to break hard soil.
- Loading height (42") for ease of use.
Engine
Displacement
Minimum ATV Size: 350 cc
Wheels & Tires
Tires, Rear Specification
Transport / Gauging: 13" (33.0 cm) Diameter 4 ply tubeless
Electric
Electrical
12 Volt Actuator Amperage: 34 amps at startup. / 28 amps during normal operation
Chassis
Hitch/Type
Pull type
Dimensions
Dimensions
Minimum Tractor/vehicle Size: 17 hp (12.7 kw) | Disc Blade Size & Type: 16" (40.6 cm) Notched | Blade Spacing: 7 1/2" (19.1 cm) | Bearing Hanger: 3/8" (10 mm) Plate | Gang Tube: 3" x 2" (7.6 cm x 5.1 cm) | Gang Axle: 1" (2.5 cm) | Disc Angle: Front Gang: 0, 7, 14 & 21 degrees / Rear Gang: 0, 7, 14 & 21 degrees | Frame Construction: 2" x 2" (5.1 cm x 5.1 cm) Square tubular design
Height
52" (1.32 m) | Hitch with Tongue Level: Adjustable from 15 1/2" to 31" (39.4 cm to 78.7 cm) with wheels in transport position. / Adjustable from 9 5/8" to 21 3/4" (24.4 cm to 55.2 cm) with discs sitting on the ground.
Length
104" (2.64 m)
Width
54" (1.37 m)
Cutting Width
Disc: 40" to 50" (1.02 m to 1.27 m)
Weights
Weight
Base Unit: 370 lbs (167.8 kg) / 510 lbs (231.3 kg) (With Spin Spreader and roller.) | Hitch: 170 lbs (77.1 kg) (In transport position with roller up and 100 lbs (45.4 kg) in Spin Spreader hopper.) | Load on Each Disc: 46 lbs (20.9 kg)
Features
Features
Number of Disc Blades: 8 | Bearing Type, 2 per Gang: Self Aligning, Sealed Bearing | Lifting Device: Ratchet Jack or 12 volt Linear Actuator | Rear Axle pivot Type: Greasable | Rear Roller Bearing: Greasable
Construction Material
Gang Axle: Square high carbon steel